Thickness | 5mm to 150mm |
Material Grade | A |
Usage/Application | Industrial |
Technique | Hot Rolled |
Surface Treatment | Galvanized |
Width | 600 - 3200 mm |
Country of Origin | Made in India |
Thickness | 1-2 mm |
Usage/Application | Industrial |
Technique | Hot Rolled |
Width | 1000 - 4000 mm |
Length | 1000 - 12000 mm |
Country of Origin | Made in India |
Usage/Application | Industrial |
Thickness | >5 mm |
Technique | Hot Rolled |
Length | 6,000mm to 12,000mm |
Width | 1,500mm to 2,500mm |
Country of Origin | Made in India |
C | Mn | P | S | Si | ||||||
t < 12.5 | 12.5mm < t =50mm | 50mm < t ≤ 100mm | 100mm < t ≤ 200mm | t < 200 | t < 12.5 | t 12s.5 | ||||
A516 Grade 70 | 0.27 | 0.28 | 0.3 | 0.31 | 0.31 | 0.85-1.2 | 0.85-1.2 | 0.035 | 0.035 | 0.15-0.4 |
Tensile Strength (ksi) | Tensile Strength (MPa) | Yield Strength (ksi) | Yield Strength (MPa) | Elongation in 200mm(%) | Elongation in 50mm(%) | |
A516 Grade 70 | 70-90 | 485-620 | 38 | 260 | 17 | 21 |
Usage/Application | Construction |
Length | 2500mm to 12000mm |
Thickness | 3mm to 100mm |
Width | 1250mm to 2500mm |
Country of Origin | Made in India |
Thickness | 3mm to 100mm |
Width | 1250mm to 2500mm |
Length | 2500mm to 12000mm |
Usage/Application | Industrial |
Country of Origin | Made in India |
Usage/Application | Construction |
Technique | Cold Rolled |
Thickness available | 5mm-60mm |
Length | 4000 - 6000 mm |
Width | 60 - 1000 mm |
Model No. | A516 |
Country of Origin | Made in India |
Thickness | 3mm to 100mm |
Usage/Application | Industrial |
Width | 1250mm to 2500mm |
Length | 2500mm to 12000mm |
Country of Origin | Made in India |
Usage/Application | Industrial |
Thickness | 3mm to 100mm |
Width | 1250mm to 2500mm |
Length | 2500mm to 12000mm |
Country of Origin | Made in India |
Usage/Application | Industrial |
Length | 2500mm to 12000mm |
Thickness | 3mm to 100mm |
Width | 1250mm to 2500mm |
Country of Origin | Made in India |
Usage/Application | Industrial |
Width | 1250mm to 2500mm |
Length | 2500mm to 12000mm |
Thickness | 3mm to 100mm |
Country of Origin | Made in India |
Usage/Application | Industrial |
Thickness | 3mm to 100mm |
Width | 1250mm to 2500mm |
Length | 2500mm to 12000mm |
Country of Origin | Made in India |
Usage/Application | Industrial |
Thickness | 3mm to 100mm |
Width | 1250mm to 2500mm |
Length | 2500mm to 12000mm |
Country of Origin | Made in India |
Grade | IS 2062 |
Thickness | Above 4mm |
Material | Mild Steel Plate |
Usage / Application | Industrial |
Brand | SAIL, ESSAR, JINDAL |
Finishing | HR |
Color | Black |
Country of Origin | Made in India |
Grade | E350C |
Material Type | Mild Steel |
Thickness | 5~150 mm |
Usage/Application | Industrial |
Length | 0.45 - 5 m |
Width | 1000-1250 mm |
Surface Finish | Polished |
Country of Origin | Made in India |
Carbon Content | High |
Corrosion Resistance | Good |
Hardness | Varies |
Material | Carbon Steel |
Minimum Order Quantity | 100 Kg |
Material Grade | GR.60/65/70 |
Type | PLATE |
Thickness | 5-150MM |
Brand | ESSAR/JINDAL/SAIL |
Size | 1250/1500/2000/2500/3000 X 2500/6000/12000 |
Material | BOILER PLATE |
Usage/Application | BOILER |
Shape | Rectangular |
Standard | ASTM A 516 |
Surface Treatment | NORMALIZE |
Thickness | 5-50 |
Shape | Rectangular |
Type | plate |
Brand | ssab |
Material Grade | hardox plate |
Technique | hardox plate |
Usage/Application | jcb/hydro |
Color | red |
Certification | 3.1 |
With a firm commitment to quality, our organization is engaged in offering a wide ambit of MS Plate.
Grade | s355J2+N |
Material_Type | Mild Steel |
Product_Name | Mild Steel Plates s355J2+N |
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
BOILER AND PRESSURE VESSEL QUALITY STEEL
Product Description
Boiler and Pressure vessel quality steel is special quality steel with an ability to withstand pressure at different temperatures whether ambient, low or high. These steels are plain carbon-manganese or low alloy steel manufactured with highest quality standard in order to make them comply with special characteristics like high strength, toughness at sub-zero temperatures and good weldability. These steel plates are normally used in as rolled, Normalized or normalized and tempered or in quenched and tempered condition as per standards. The product characteristics are developed with proper control of steel chemistry, rolling and heat treatment process. The steel is able to withstand the varied combination of post weld simulation heat treatment meeting the strength and toughness.
Product Application
Steel for pressure vessels are mainly used to manufacture boilers, drums, pressure vessels and piping, heat exchanger, storage tanks etc. this steel is suitable for mechanical hot / cold forming and welding.
Supply condition
As Rolled/Normalised/Normalised + Tempered/Quenched + Tempered.
Special Requirements
Vacuum Degassing
Restricted chemistry and carbon equivalent
Product analysis
Simulation PWHT on test coupons
Elevated temperature tensile testing
Charpy Impact test in transverse direction
Through thickness properties
HIC/SSCC resistant and NACE compliance.
Boiler Plates, ASTM A516 60, ASTM A516 70, ASTM A516 70N, ASTM A516 GR60, ASTM A516 GR70, ASME SA516, SA516 70 Carbon Steel, Carbon Steel Plates, Carbon Steel Sheet, Carbon Steel Plate Price, ASTM A516, Carbon Steel Sheet Price, Carbon Steel Sheet Metal, High Carbon Steel Plate, Carbon Steel Plate Grades, Carbon Steel Plate Supplier, A516GR70, A516 Plate, ASTM A515, 516 70 Steel, A516 ASTM, A516 Carbon Steel
Thickness | 3mm to 100mm |
Usage/Application | Industrial |
Length | 2500mm 12000mm |
Width | 1250mm to 2500mm |
Country of Origin | Made in India |
Thickness | 3mm to 100mm |
Usage/Application | Industrial |
Width | 1250mm to 2500mm |
Length | 2500mm to 12000mm |
Country of Origin | Made in India |